Color stability and translucency of newly developed composites for splinting teeth.

This study aimed to investigate the colorimetric properties of newly developed composites for dental trauma splints using various staining solutions during the clinical splinting period. The clear shades of G-Fix (GF), Ortho Connect Flow (OC), Light Fix (LF), and Filtek Z350XT (FZ) were fabricated into 96 disk-shaped specimens. Specimens from each composite group were stored in distilled water, coffee, tea, and red wine solutions at 37ºC. CIE values were measured using a spectrophotometer at 24 h after specimen preparation and at 1 day, 1 week, 2 weeks, 3 weeks, and 4 weeks after storage in each solution. Color differences and translucency parameters were calculated using the initial and measured values. Within the experiment period, the color differences of GF, OC, and LF compared to the initial measurement were smaller than that for FZ for all staining solutions except distilled water. There were no significant color differences between the GF, OC, and LF groups.

Fully automated deep learning approach to dental development assessment in panoramic radiographs.

BACKGROUND: Dental development assessment is an important factor in dental age estimation and dental maturity evaluation. This study aimed to develop and evaluate the performance of an automated dental development staging system based on Demirjian's method using deep learning. METHODS: The study included 5133 anonymous panoramic radiographs obtained from the Department of Pediatric Dentistry database at Seoul National University Dental Hospital between 2020 and 2021. The proposed methodology involves a three-step procedure for dental staging: detection, segmentation, and classification. The panoramic data were randomly divided into training and validating sets (8:2), and YOLOv5, U-Net, and EfficientNet were trained and employed for each stage. The models' performance, along with the Grad-CAM analysis of EfficientNet, was evaluated. RESULTS: The mean average precision (mAP) was 0.995 for detection, and the segmentation achieved an accuracy of 0.978. The classification performance showed F1 scores of 69.23, 80.67, 84.97, and 90.81 for the Incisor, Canine, Premolar, and Molar models, respectively. In the Grad-CAM analysis, the classification model focused on the apical portion of the developing tooth, a crucial feature for staging according to Demirjian's method. CONCLUSIONS: These results indicate that the proposed deep learning approach for automated dental staging can serve as a supportive tool for dentists, facilitating rapid and objective dental age estimation and dental maturity evaluation.

Influence of postprinting cleaning methods on the cleaning efficiency and surface and mechanical properties of three-dimensionally printed resins.

STATEMENT OF PROBLEM: The outcome of photopolymerized 3-dimensional (3D) printing is influenced by the methods used for postprinting cleaning, yet information on postprinting cleaning is sparse. PURPOSE: The purpose of this in vitro study was to assess the cleaning efficiency and surface and mechanical properties of 3D printed resin according to postprinting cleaning methods. MATERIAL AND METHODS: Specimens were fabricated from a 3D model using resin materials (NextDent C&B MFH and DIOnavi-P. MAX) and were tested for postprinting cleaning methods for 5 minutes with isopropyl alcohol, isopropyl alcohol + ultrasonic, ethyl alcohol, ethyl alcohol + ultrasonic, and ultrasonic alone. Postpolymerization was followed for 5 minutes. The cleaning efficiency, microcomputed tomography (µCT), surface roughness, Vickers hardness, and flexural strength of the specimens were evaluated. The 1-way ANOVA test was performed after considering normality. A post hoc analysis with Bonferroni was also performed (α=.008 or.005). RESULTS: Ultrasonic in addition to cleaning solutions significantly improved the cleaning efficiency in NextDent C&B MFH specimens (P<.005), whereas ultrasonic did not affect the efficiency in DIOnavi-P. MAX specimens. No significant differences were found in surface roughness by postprinting cleaning methods in either NextDent C&B MFH or DIOnavi-P. MAX (P>.005). No significant changes in surface hardness were observed by postprinting cleaning methods (P>.008). In the NextDent C&B MFH, ethyl alcohol + ultrasonic significantly decreased the flexural strength (P<.005). There were no significant differences in the flexural strength in the DIOnavi-P. MAX (P>.005). CONCLUSIONS: Ethyl alcohol was comparable with isopropyl alcohol for use as a postprinting cleaning solution for both NextDent C&B MFH and DIOnavi-P. MAX. The addition of ultrasonic to cleaning solutions should be applied with caution. These findings suggest that different postprinting cleaning methods can be recommended depending on the 3D printed resin materials.

Correlation between dental and skeletal maturity in Korean children based on dental maturity percentile: a retrospective study.

BACKGROUND: The correlation between dental maturity and skeletal maturity has been proposed, but its clinical application remains challenging. Moreover, the varying correlations observed in different studies indicate the necessity for research tailored to specific populations. AIM: To compare skeletal maturity in Korean children with advanced and delayed dental maturity using dental maturity percentile. DESIGN: Dental panoramic radiographs and cephalometric radiographs were obtained from 5133 and 395 healthy Korean children aged between 4 and 16 years old. Dental maturity was assessed with Demirjian's method, while skeletal maturity was assessed with the cervical vertebral maturation method. Standard percentile curves were developed through quantile regression. Advanced (93 boys and 110 girls) and delayed (92 boys and 100 girls) dental maturity groups were defined by the 50th percentile. RESULTS: The advanced group showed earlier skeletal maturity in multiple cervical stages (CS) in both boys (CS 1, 2, 3, 4, and 6) and girls (CS 1, 3, 4, 5, and 6). Significant differences, as determined by Mann-Whitney U tests, were observed in CS 1 for boys (p = 0.004) and in CS 4 for girls (p = 0.037). High Spearman correlation coefficients between dental maturity and cervical vertebral maturity exceeded 0.826 (p = 0.000) in all groups. CONCLUSION: A correlation between dental and skeletal maturity, as well as advanced skeletal maturity in the advanced dental maturity group, was observed. Using percentile curves to determine dental maturity may aid in assessing skeletal maturity, with potential applications in orthodontic diagnosis and treatment planning.

The Impact of Oxygen Concentration on the Postcuring of 3D-Printed Dental Resin.

PURPOSE: This study investigated the impact of reducing the oxygen concentration via nitrogen injection during the postcuring process of 3D-printed dental materials. MATERIALS AND METHODS: Resin specimens for dental crown and bridge (15-mm diameter, both 1-mm and 2-mm heights) were 3D-printed and rinsed. Subsequently, the postcuring process was conducted on nine groups categorized according to atmospheric conditions within the curing device (20% [control], 10%, and 5% oxygen) and curing times (10, 15, and 20 minutes). Surface roughness was measured using a gloss meter. Surface polymerization was confirmed through Fourier-transform infrared spectroscopy (FT-IR) analysis, and the flexural strength and elastic modulus of the specimens were measured using a universal testing machine. Water absorption and solubility were determined according to Inernational Organization for Standardization (ISO) standards. All evaluation criteria were statistically analyzed using one-way ANOVA and Tukey's post hoc test based on oxygen concentration. RESULTS: The elastic modulus did not show statistically significant differences in all groups. However, compared to the control group, the flexural strength, degree of conversion, and gloss significantly increased in the groups with decreased oxygen concentrations. Conversely, water solubility and water absorption significantly decreased in a few groups with reduced oxygen concentration. CONCLUSIONS: Reducing oxygen concentration through nitrogen injection during the postcuring process of 3D printing enhances the suitability of the dental prosthetic materials. The significant increase in flexural strength can particularly enhance the utility of these materials in dental prosthetics.

Criteria for early diagnosis of mandibular third molar agenesis based on the developmental stages of mandibular canine, first and second premolars, and second molar: a retrospective cohort study.

BACKGROUND: Permanent first molars with severe dental caries, developmental defects, or involved in oral pathologies are at risk of poor prognosis in children. Accordingly, using the third molar to replace the first molar can be a good treatment option when third molar agenesis is predicted early. Thus, this retrospective cohort study aimed to develop criteria for early detection of mandibular third molar (L8) agenesis based on the developmental stages of mandibular canine (L3), first premolar (L4), second premolar (L5), and second molar (L7). METHOD: Overall, 1,044 and 919 panoramic radiographs of 343 males and 317 females, respectively, taken between the ages of 6 and 12 years were included. All developmental stages of L3, L4, L5, L7, and L8 were analyzed based on the dental age, as suggested by Demirjian et al. The independent t-test was used to assess age differences between males and females. The rank correlation coefficients were examined using Kendall's tau with bootstrap analysis and Bonferroni's correction to confirm the teeth showing developmental stages most similar to those of L8s. Finally, a survival analysis was performed to determine the criteria for the early diagnosis of mandibular third molar agenesis. RESULTS: Some age differences were found in dental developmental stages between males and females. Correlation coefficients between all stages of L3, L4, L5, and L7 and L8 were high. In particular, the correlation coefficient between L7 and L8 was the highest, whereas that between L3 and L8 was the lowest. CONCLUSION: If at least two of the following criteria (F stage of L3, F stage of L4, F stage of L5, and E stage of L7) are met in the absence of L8 crypt, agenesis of L8 can be confirmed.

Identification of a Novel FAM83H Mutation and Management of Hypocalcified Amelogenesis Imperfecta in Early Childhood.

Amelogenesis imperfecta (AI) is a heterogeneous group of rare genetic disorders affecting amelogenesis during dental development. Therefore, the molecular genetic etiology of AI can provide information about the nature and progress of the disease. To confirm the genetic etiology of AI in a Korean family with an autosomal dominant inheritance, pedigree and mutational analyses were performed. DNA was isolated from the participating family members and whole-exome sequencing was performed with the DNA sample of the father of the proband. The identified mutation was confirmed by Sanger sequencing. The mutational analysis revealed a novel nonsense mutation in the FAM83H gene (NM_198488.5: c.1363C > T, p.(Gln455*)), confirming autosomal dominant hypocalcified AI. Full-mouth restorative treatments of the affected children were performed after the completion of the deciduous dentition. Early diagnosis of AI can be useful for understanding the nature of the disease and for managing the condition and treatment planning.

Three-dimensional evaluation of tooth preparation forms in paediatric zirconia crowns: An in vitro study.

BACKGROUND: Though prefabricated zirconia crowns (PZCs) differ from stainless steel crowns and have different preparation guidelines for optimal crown adaptation, little is known about how clinicians prepare teeth for PZCs. AIM: To investigate the prepared tooth forms for PZCs and identify the shared patterns of tooth preparation. DESIGN: Twenty participants prepared primary maxillary first molars and mandibular second molars for PZCs. A model with ideally prepared tooth was digitally generated as a reference. The prepared teeth were digitally scanned and superimposed on the reference. Three-dimensional analysis software was used to evaluate the discrepancy between ideal and prepared surface for overall surface and subdivided area. RESULTS: Half of the surfaces received excessive reduction, and 24% showed error within 0.2 mm (p < .001) in maxilla. 41.6% of surfaces showed error within 0.2 mm, and 20% were excessively prepared (p = .002) in mandible. The highest discrepancies were found at the mesiopalatal line angles (maxillary) and at the distobuccal line angles (mandibular). Significant discrepancies were observed on the occlusal surfaces, especially at the cusps. CONCLUSIONS: Tooth preparations for PZCs showed wide variations related to depth among the participants.

Mechanical evaluation of dental trauma splints fabricated using recently-developed photo-polymerizable composites.

This study aimed to determine functionality and mechanical properties of dental splints. Five splints were tested: a control splint Filtek Z350XT (ZF), two splints with G-Fix (GF) and Light Fix (LF), and two wire-composite splints with ZF (ZW) and Ortho Connect Flow (CW). Periotest values, elastic modulus, flexural, compressive, and diametral tensile strength were measured. ZW and CW showed no significant differences in flexibility in labial or occlusal pressure of upper central incisors. LF, GF, and ZF did not differ in labial or palatal pressure. ZW and CW had higher flexibility than LF, GF, and ZF. LF had the lowest flexural and compressive strength but the highest diametral tensile strength. This study showed that ZW and CW might be options for flexible splints, whereas LF and GF would be options for rigid splints. Additionally, CW and LF/GF might be simpler alternatives to ZW and ZF, respectively.

Non-Syndromic Dentinogenesis Imperfecta Caused by Mild Mutations in COL1A2.

Hereditary dentin defects can be categorized as a syndromic form predominantly related to osteogenesis imperfecta (OI) or isolated forms without other non-oral phenotypes. Mutations in the gene encoding dentin sialophosphoprotein (DSPP) have been identified to cause dentinogenesis imperfecta (DGI) Types II and III and dentin dysplasia (DD) Type II. While DGI Type I is an OI-related syndromic phenotype caused mostly by monoallelic mutations in the genes encoding collagen type I alpha 1 chain (COL1A1) and collagen type I alpha 2 chain (COL1A2). In this study, we recruited families with non-syndromic dentin defects and performed candidate gene sequencing for DSPP exons and exon/intron boundaries. Three unrelated Korean families were further analyzed by whole-exome sequencing due to the lack of the DSPP mutation, and heterozygous COL1A2 mutations were identified: c.3233G>A, p.(Gly1078Asp) in Family 1 and c.1171G>A, p.(Gly391Ser) in Family 2 and 3. Haplotype analysis revealed different disease alleles in Families 2 and 3, suggesting a mutational hotspot. We suggest expanding the molecular genetic etiology to include COL1A2 for isolated dentin defects in addition to DSPP.

Shear Bond Strength of Different MDP-Containing Adhesive Systems on Enamel and Dentin from Primary Teeth.

OBJECTIVE: To compare the shear bond strength (SBS) after thermocycling of four universal adhesives applied in self-etch mode on dentin and etch-and-rinse mode on enamel. STUDY DESIGN: Flat 144 buccal or lingual dentin and enamel surfaces from 72 non-carious primary molars were prepared. Samples were segregated into 12 groups (n=12): Adper Single Bond 2 etch-and-rinse (SB_T) and Clearfil SE Bond self-etch (SE_S) applied to enamel and dentin served as controls. Scotch Bond Universal Adhesive (SBU), Clearfil S3 Bond Universal Adhesive (SEU), Tetric N-Bond Universal Adhesive (TEN), and All Bond Universal (BIS) were applied in etch-and-rinse mode to enamel and in self-etch mode to dentin. They were thermocycled for 5000 cycles. SBS testing and the evaluation of fracture mode were performed. RESULTS: SB_T showed statistically higher SBS than other adhesive groups using etch-and-rinse mode on enamel. SE_S and BIS had statistically higher SBS than other adhesive groups using self-etch mode on dentin. Mixed failure was the most common failure mode in each group. CONCLUSION: The universal adhesives did not show higher SBS than SB_T when using etch-and-rinse on enamel. All universal adhesives showed higher SBS than SB_T and had SBS similar to SE_S, except SBU when using self-etch mode on dentin.

Influence of a new polishing system on changes in gloss and surface roughness of resin composites after polishing and brushing.

This study aimed to compare the change of surface roughness (Ra) and gloss units (GU) of five dental composites (Filtek Z250, Filtek Z350XT, Metafil CX, Ceram X one, and Venus Diamond) polished with three systems (Sof-Lex XT, Enhance/Pogo, and Sof-Lex Diamond) before/after simulated brushings and to determine the amount of time required to achieve maximum gloss. Ninety rectangular specimens (n=18 per composite) were prepared. Six specimens of each composite were assigned to one of the polishing systems. The Ra and GU of each specimen were measured after each polishing step. Five polished specimens per composite were brushed with a toothbrush machine, and the Ra and GU values were determined. Filtek Z350XT exhibited the most stable and lowest Ra during the brushing cycles regardless of polishing system. When using the Sof-Lex Diamond and Enhance/Pogo systems, the highest gloss and the smoothest surfaces were achieved after polishing and brushing.

Physicochemical properties of dentinogenesis imperfecta with a known DSPP mutation.

AIM: To investigate the chemical and mechanical properties of teeth affected by a 1-bp deletion (c.2688delT) in the DSPP gene. METHODS AND MATERIALS: Maxillary first premolars were extracted from the affected individual at age 9 years due to the orthodontic reason for crowding. A sample was imbedded in epoxy resin and sectioned buccolingually, after micro-computerized tomography (µCT) images were taken. Scanning Electron Microscopy (SEM), Energy Dispersive Spectrometry (EDS) and Vickers microhardness testing were also performed. RESULTS: µCT reconstruction and analysis showed an irregularly obliterated pulp chamber and an extremely small pulpal volume in the DGI-II sample. The mineral density and microhardness scores were smaller in the dentin of the DGI-II sample compared to the wild-type. Mg content was lower in the dentin of the DGI-II sample compared to the wild-type. CONCLUSION: This study shows that dentin affected by a 1-bp deletion in DSPP has a reduced mineral density, diminished microhardness and reduced Mg content.

Analysis of brain connectivity during nitrous oxide sedation using graph theory.

Nitrous oxide, the least potent inhalation anesthetic, is widely used for conscious sedation. Recently, it has been reported that the occurrence of anesthetic-induced loss of consciousness decreases the interconnection between brain regions, resulting in brain network changes. However, few studies have investigated these changes in conscious sedation using nitrous oxide. Therefore, the present study aimed to use graph theory to analyze changes in brain networks during nitrous oxide sedation. Participants were 20 healthy volunteers (10 men and 10 women, 20-40 years old) with no history of systemic disease. We acquired electroencephalogram (EEG) recordings of 32 channels during baseline, nitrous oxide inhalation sedation, and recovery. EEG epochs from the baseline and the sedation state (50% nitrous oxide) were extracted and analyzed with the network connection parameters of graph theory. Analysis of 1/f dynamics, revealed a steeper slope while in the sedation state than during the baseline. Network connectivity parameters showed significant differences between the baseline and sedation state, in delta, alpha1, alpha2, and beta2 frequency bands. The most pronounced differences in functional distance during nitrous oxide sedation were observed in the alpha1 and alpha2 frequency bands. Change in 1/f dynamics indicates that changes in brain network systems occur during nitrous oxide administration. Changes in network parameters imply that nitrous oxide interferes with the efficiency of information integration in the frequency bands important for cognitive processes and attention tasks. Alteration of brain network during nitrous oxide administration may be associated to the sedative mechanism of nitrous oxide.

Clinical Considerations for Dental Management of Children with Molar-Root Incisor Malformations.

Molar root-incisor malformation (MRIM) or molar-incisor malformation (MIM) is a new type of dental anomaly characterized by dysplastic roots of permanent first molars, occasionally second primary molars, and the crowns of maxillary central incisors. MRIM involving permanent first molars and second primary molars is characterized by normal crowns with short, thin, and narrow roots, whereas MRIM involving permanent maxillary central incisors exhibits constrictions of the crown in the cervical area. In the first case, we extracted the affected first permanent molars at the optimal timing to minimize space deficiencies and induce space closure. In addition, composite resin restorations were performed on the anterior central incisors. In the second case, a mandibular lingual arch was used to stabilize the affected teeth in order to mitigate discomfort by reducing rotational biting forces.

Prediction of agenesis of the maxillary second premolar based on the developmental stages of the maxillary canine, first premolar, and second molar.

OBJECTIVE: This study aimed to suggest criteria for the early diagnosis of agenesis of the maxillary second premolars (U5) based on the developmental stages of the maxillary canines (U3), first premolars (U4), and second molars (U7). DESIGN: Overall, 303 control patients and 72 patients with agenesis who met the inclusion criteria were analyzed among 5136 patients aged 5-11 years for whom panoramic radiographs were obtained at Seoul National University Dental Hospital from June 2008 to December 2009. All developmental stages of U3, U4, U5, and U7 in both groups were evaluated and categorized into the stages proposed by Demirjian et al. To confirm the delayed dental development in the agenesis group, the Wilcoxon rank sum test was used. For verifying the tooth with the most similar developmental pattern to U5, the Kendall tau Rank Correlation and Bootstrap methods were used. Moreover, survival analysis and leave-one-out-cross-validation were performed to identify the earliest developmental stages of U3, U4, and U7 at which agenesis of U5 can be confirmed. RESULTS: The developmental stage of U4 in the agenesis group was significantly delayed compared with that in the control group at ages 5-10. All of the stages of U3, U4, and U7 showed high correlation coefficients with U5. CONCLUSION: U5 agenesis can be confirmed with high prediction accuracy when at least two of the three conditions are satisfied: U3, U4, and U7 in Demirjian stages E, D, and C, respectively.

WNT10A mutations causing oligodontia.

OBJECTIVES: To identify the molecular genetic etiology of the families with non-syndromic multiple missing permanent teeth (oligodontia). MATERIALS AND METHODS: Genomic DNA was isolated and measured, and whole-exome sequencing was performed. The obtained sequencing reads were aligned to the human reference genome and subsequently processed by a series of bioinformatics programs. Finally, short insertions/deletions and single nucleotide variations were annotated with dbSNP build 138. RESULTS: The proband of family 1 was missing 14 permanent teeth, and the mutational analysis revealed compound heterozygousWNT10A mutations (c.364A > T and c.511C > T). Two affected individuals in family 2 were missing 20 and 12 permanent teeth, respectively, and compound heterozygous WNT10A mutations (c.364A > T and c.637G > A) were also identified. CONCLUSIONS: This study reveals compound heterozygousWNT10A missense mutations in two families with non-syndromic oligodontia which will improve the understanding of odontogenesis and the pathogenesis related to WNT10A mutations.

Increasing access to oral healthcare for marriage-immigrant women in South Korea: programme design to policy recommendation.

OBJECTIVES: To examine oral health status and access to dental care among marriage-immigrant women (MIW) in South Korea (Korea). MATERIALS AND METHODS: We analysed patients' demographic information and access to dental services through the 'Family-Love Dental Program' and compared them with Korean oral health surveillance data. The 'Family-Love Dental Program' resulted from a partnership among the Korean Ministry of the Gender Equality and Family, Seoul National University Dental Hospital, and Cigna Insurance Company (registered as 'LINA' in South Korea) to increase access to oral health for MIW from 2010 to 2016. RESULTS: Over the programme duration, 1,944 MIW underwent dental examination and 1598 MIW received dental treatment. More than two-thirds of MIW (69.5%) receiving dental services were aged between 20 and 39 years. In 2016, the proportion of untreated dental caries among MIW was 54.8%, which was significantly higher than that of untreated dental caries among Korean women within the same age group (24.9%). Over the programme duration, 501 MIW (25.8%) underwent final restoration, and advanced care was provided at the Seoul National University Dental Hospital. CONCLUSION: MIW have a significantly higher number of dental caries than Korean women within the same age group. Future programmes and policies should consider specific barriers that will promote oral health parity for MIW and their children.

Candidate gene sequencing reveals mutations causing hypoplastic amelogenesis imperfecta.

OBJECTIVE: Amelogenesis imperfecta (AI) is a rare hereditary disorder affecting the quality and quantity of the tooth enamel. The purpose of this study was to identify the genetic etiology of hypoplastic AI families based on the candidate gene approach. MATERIALS AND METHODS: We recruited three Turkish families with hypoplastic AI and performed a candidate gene screening based on the characteristic clinical feature to find the pathogenic genetic etiology. RESULTS: The candidate gene sequencing of the LAMB3 gene for family 1 revealed a heterozygous nonsense mutation in the last exon [c.3431C > A, p.(Ser1144*)]. FAM20A gene sequencing for families 2 and 3 identified a homozygous deletion [c.34_35delCT, p.(Leu12Alafs*67)] and a homozygous deletion-insertion (c.1109 + 3_1109 + 7delinsTGGTC) mutation, respectively. CONCLUSION: The candidate gene approach can be successfully used to identify the genetic etiology of the AI in some cases with characteristic clinical features. CLINICAL RELEVANCE: Identification of the genetic etiology of the AI will help both the family members and dentist understand the nature of the disorder. Characteristic clinical feature can suggest possible genetic causes.